Aeroo Shield AS09 aerosol fire extinguishing system
1.349,00 lei + VAT
Aerosol fire extinguishing system
- Instant activation
- Installation in 5 seconds
- Leaves no extinguishing residue
- Unpressurised product
- Maintenance free
- No wiring, no batteries
Aerosol fire extinguishing system
AEROO SHIELD 9 - AS09 is a aerosol extinguishing system thermally actuated, self-contained, automatic fire extinguishing system with compact size and light weight, which facilitates installation and fire extinguishing needs in small spaces.
It can be glued to any surface, thanks to the high-strength adhesive strip it comes equipped with. Easy to install.
It is activated by a linear ignition wick, which is initiated when the space temperature reaches 180 ± 20 ºC or on flame contact.
The extinguishing agent will rapidly flood the protected space to suppress the fire. The effective protected space of the AEROO SHIELD 9 - AS09 is 0.9 cubic meters.
The product is suitable for small, fire-prone spaces such as electrical panels, control panels, meter boxes, electrical distribution panels (cabinets).
Product data:
- Product name: AEROO SHIELD 9 - AS09
- Item number: AS09
- Discharge time: ≤5 seconds
- Agent mass: 35 gr
- Extinguishing capacity: 0.9 mc
- Working temperature: -30~70 ºC
- Initiation: at a temperature of 180 ± 20 ºC or in contact with the flame
- Lifetime: 5 years
- Size:
- Base diameter: 85 mm
- Height: 30 mm
The volume of protection of a single unit is 0.9 cubic metres, the product shall be placed in the upper part of the protected space, above the point of initiation of a possible fire, with the activation points pointing downwards or on the wall of the protected space with the activation points pointing towards the equipment in the protected space. For spaces larger than 0.9 cubic metres the technical specification for installation in such spaces shall be consulted.
The Aeroo Shield AS09 Aerosol Aerosol Fire Suppression System (aerosol fire suppression aerosol generator), must be in an enclosed condition prior to spraying to ensure reliable performance. Ensure that there is no obstruction within 100 mm directly in front of the activation diodes of the device and it is not suitable for installation in the air exhaust position below the protective space. In case of activation, the device will start automatically and can only be touched after it has cooled down.
After activation ventilate the space by opening the window or door. If activated, recycle. If not activated before the expiration date, remove and return the disposal to the supplier.
The product should be stored in a cool dry place with good ventilation and exposure to sunlight should be avoided.
- It is strictly forbidden to store this product near a heat source
- It is forbidden to apply pressure to the product
- It is forbidden to use it after the expiry date