Aeroo Shield AS03 aerosol fire extinguishing system

The volume of protection of a single unit is 0.3mc, the product shall be placed at the top of the protected space, above the point of initiation of a possible fire, with the activation points pointing downwards or on the wall of the protected space with the activation points pointing towards the equipment in the protected space. For spaces larger than 0.3mc the technical specifications for installation in such spaces should be consulted.

The Aeroo Shield AS09 Aerosol Aerosol Fire Suppression System (aerosol fire suppression aerosol generator), must be in a closed state prior to spraying to ensure reliable performance. Ensure that there is no obstruction within 100 mm directly in front of the activation diodes of the device and it is not suitable for installation in the air exhaust position below the protective space. In case of activation, the device will start automatically and can only be touched after it has cooled down.
After activation ventilate the space by opening the window or door. If activated, recycle. If not activated before expiration date, remove and return the device to the supplier.

The product should be stored in a cool dry place with good ventilation and exposure to sunlight should be avoided.

• It is strictly forbidden to store this product near a heat source
• It is forbidden to apply pressure to the product
• It is forbidden to use it after the expiry date