Aeroo Shield AS06

1.049,00 lei + VAT

Aeroo Shield AS06

1.049,00 lei + VAT

AEROO SHIELD 6 - AS06 is a self-contained, automatic, thermal actuated aerosol fire extinguishing generator specially designed and developed by our company for small spaces.

Checkout SIgur
  • Instant activation
  • Installation in 5 seconds
  • Leaves no extinguishing residue
  • Unpressurised product
  • Maintenance free
  • No wiring, no batteries


AEROO SHIELD 6 - AS06 is a self-contained, automatic, thermally actuated fire extinguishing aerosol generator that is compact in size and light in weight, making it easy to install and extinguish fires in small spaces. It can be glued to any surface, thanks to a high-strength adhesive strip with which it comes equipped. It is easy to install. It is activated by a linear ignition wick, which starts when the temperature of the space reaches 180 ± 20 ºC or when the flame comes into contact. The extinguishing agent will quickly flood the protected space to suppress the fire. The effective protection space of the AEROO SHIELD 6 - AS06 is 0.6 m3.
The product is suitable for small, fire-prone spaces such as electrical panels, control panels, meter boxes, electrical distribution panels (cabinets).

Product data:

  • Product name: AEROO SHIELD 6 - AS06
  • Item number: AS06
  • Discharge time: ≤5 seconds
  • Agent mass: 27 gr
  • Extinguishing capacity: 0.6 mc
  • Working temperature: -30~70 ºC
  • Initiation: at a temperature of 180 ± 20 ºC or in contact with the flame
  • Lifetime: 5 years
  • Size:
    • Base diameter: 85 mm
    • Height: 30 mm

The protection volume of a single unit is 0.6mc, the product shall be placed on top of the protected space, above the point of initiation of a possible fire, with the activation points facing downwards or on the wall of the protected space with the activation points facing the equipment in the protected space. For spaces larger than 0.6mc the technical specification for installation in such spaces should be consulted.

The aerosol generator for firefighting must be in a closed state before spraying to ensure reliable performance. Ensure that there is no obstruction 100 mm directly in front of the device's activation nozzles and it is not suitable for installation in the air discharge position below the protective space. In case of activation, the device will start automatically and can only be touched after it has cooled down.
After activation, ventilate the space by opening the window or door. If not activated before the expiry date, remove and return the dispenser to the supplier.

The product should be stored in a cool dry place with good ventilation and exposure to sunlight should be avoided.

  • It is strictly forbidden to store this product near a heat source
  • It is forbidden to apply pressure to the product
  • It is forbidden to use it after the expiry date